No. 9 - 2008-05-15
List of standards published since 30 April 2008 - Publications can be ordered and downloaded immediately
ELECTRICAL ENGINEERING IEC 60034-4 Ed. 3.0 (2008-05) Preview Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests Project IEC 60364-4-43 Ed. 3.0 (2008-05) Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent Project IEC 60851-5 Ed. 4.0 (2008-05) Winding wires - Test methods - Part 5: Electrical properties Project IEC 61039 Ed. 2.0 (2008-05) Classification of insulating liquids IEC 61251 Ed. 2.0 (2008-05) Preview Electrical insulating materials - A.C. voltage endurance evaluation - Introduction IEC 62371 Ed. 1.0 (2008-05) Preview Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
ELECTRONICS IEC 60393-1 Ed. 3.0 (2008-05) Preview Potentiometers for use in electronic equipment - Part 1: Generic specification IEC 60512-15-1 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert IEC 60512-15-2 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) IEC 60512-15-3 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) IEC 60512-15-4 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force IEC 60512-15-5 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation IEC 60512-15-6 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices IEC 60512-15-7 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment IEC 60512-16-8 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) IEC 60512-16-9 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force IEC 60512-16-11 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections IEC 60512-16-13 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections IEC 60512-16-18 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation IEC 61076-2-104 Ed. 1.0 (2008-05) Preview Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking Project IEC 61076-2-105 Ed. 1.0 (2008-05) Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking IEC 61189-6 Ed. 1.0 (2006-07) Preview Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies IEC 61192-5 Ed. 1.0 (2007-05) Preview Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies IEC 61760-2 Ed. 2.0 (2007-04) Preview Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide IEC 62137-1-1 Ed. 1.0 (2007-07) Preview Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test IEC 62137-1-2 Ed. 1.0 (2007-07) Preview Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test IEC 62258-8 Ed. 1.0 (2008-05) Preview Semiconductor die products - Part 8: EXPRESS model schema for data exchange
ENERGY & HEAT TRANSFER ENGINEERING Project IEC 61400-21 Ed. 2.0 (2008-05) Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines IEC 61646 Ed. 2.0 (2008-05) Preview Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
HOUSEHOLD Project IEC 60335-2-9 Ed. 6.0 (2008-05) Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
INFORMATION TECHNOLOGY IEC GUIDE 112 Ed. 3.0 (2008-05) Preview Guide on the safety of multimedia equipment IEC 62055-52 Ed. 1.0 (2008-05) Preview Electricity metering - Payment systems - Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection Project IEC 62424 Ed. 1.0 (2008-05) Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
MANUFACTURING ENGINEERING IEC 62439 Ed. 1.0 (2008-05) Preview High availability automation networks
MULTIMEDIA IEC 62480 Ed. 1.0 (2008-05) Preview Multimedia home network - Network interfaces for network adapter
QUANTITIES & UNITS Project IEC 62428 Ed. 1.0 (2008-05) Electric power engineering - Modal components in three-phase AC systems - Quantities and transformations
SHIPBUILDING & MARINE STRUCTURES Project IEC 62288 Ed. 1.0 (2008-05) Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results
TESTING IEC 60068-2-82 Ed. 1.0 (2007-05) Preview Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
ISO/IEC PUBLICATIONS ISO/IEC 7811-9 Ed. 1.0 (2008-05) Preview Identification cards - Recording technique - Part 9: Tactile identifier mark ISO/IEC 15444-9 Amd.2 Ed. 1.0 (2008-04) Amendment 2 - Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols - JPIP extensions ISO/IEC 16512-2 Ed. 1.0 (2008-05) Preview Information technology - Relayed multicast protocol: Specification for simplex group applications ISO/IEC 18013-2 Ed. 1.0 (2008-05) Preview Information technology - Personal identification - ISO-compliant driving licence - Part 2: Machine-readable technologies ISO/IEC 29881 Ed. 1.0 (2008-05) Preview Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method
SERIES COLLECTIONS Category Publications ELECTRICAL ENGINEERING IEC 60076-SER Ed. 1.0 (2008-02) Power transformers - ALL PARTS This pack contains all parts to IEC 60076 IEC 60502-SER Ed. 1.0 (2007-10) Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS This pack contains all parts to IEC 60502 IEC 61508-SER Ed. 1.0 (2005-01) Functional safety of electrical/electronic/programmable electronic safety-related systems - ALL PARTS This pack contains all parts to IEC 61508 IEC 62271-SER Ed. 1.0 (2008-04) High-voltage switchgear and controlgear - ALL PARTS This pack contains all parts to IEC 62271 ELECTROMAGNETIC COMPATIBILITY CISPR 16-SER Ed. 1.0 (2008-01) Specification for radio disturbance and immunity measuring apparatus and methods - ALL PARTS This pack contains all parts to CISPR 16 ENERGY & HEAT TRANSFER ENGINEERING IEC 61400-SER Ed. 1.0 (2007-03) Wind turbine generator systems - ALL PARTS This pack contains all parts to IEC 61400 FIRE HAZARD TESTING IEC 62305-SER Ed. 1.0 (2007-10) Protection against lightning - ALL PARTS This pack contains all parts to IEC 62305 MANUFACTURING ENGINEERING IEC 61511-SER Ed. 1.0 (2004-11) Functional safety - Safety instrumented systems for the process industry sector - ALL PARTS This pack contains all parts to IEC 61511 MEDICAL ELECTRICAL EQUIPMENT IEC 60601-1-SER Ed. 1.0 (2008-04) Medical electrical equipment - ALL PARTS This pack contains all parts to IEC 60601-1 MULTIMEDIA IEC 60958-SER Ed. 1.0 (2008-02) Digital audio interface - ALL PARTS This pack contains all parts to IEC 60958 IEC 61937-SER Ed. 1.0 (2007-10) Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - ALL PARTS This pack contains all parts to IEC 61937 TELECOMMUNICATIONS IEC 60870-5-SER Ed. 1.0 (2007-10) Telecontrol equipment and systems - Part 5: Transmission protocols - ALL PARTS This pack contains all parts to IEC 60870-5 IEC 61850-SER Ed. 1.0 (2007-08) Communication networks and systems in substations - ALL PARTS This pack contains all parts to IEC 61850 and an informative pdf file containing most definitions found in IEC 61850-7-3 and IEC 61850-7-4. The reader can use these pages to easily read and understand the content of the two standards, without going back and forth in the documents.